MorseKOB Interface Techniques


Interface options
Key only
Sounder driver
Loop interface
USB-to-serial adapters
Serial port pins

Interface options

While itís possible to send and receive with MorseKOB using just the keyboard and speakers, sooner or later youíll probably want to hook up a key and maybe a sounder. There are three options to choose from:

Key only
The simplest approach is to connect a key to the computer and use the programís simulated sounder for receiving. This method involves just a simple modification to an off-the-shelf serial cableóno soldering or electronic circuitry required. It allows you to send Morse manually with a straight key or bug, and if you close your eyes you can imagine that youíre hearing an actual sounder.
Sounder driver
If youíd like to connect a sounder to your computer, the most straightforward approach is to use a simple sounder driver. This circuit requires only a few commonly available components, and assembly is not difficult for someone who knows how to use a soldering iron.
Loop interface
A loop interface circuit provides the most realistic and flexible solution. It allows the computer to be placed in series with a telegraph loop consisting of a power source and one or more keys, sounders, and relays. Although this design is more complex than the simple sounder driver, circuit boards are available to make assembly less of a challenge.

Each of these interface options connects to the computer via an RS232 serial port. Since few computers come with a serial port nowadays, most likely youíll need a USB adapter cable to make the necessary connection. See the USB-to-serial adapters section for some recommendations.

Warning: Switching the current on and off in a circuit containing inductive components like the coils of a sounder or relay can generate high voltage transients which are likely to interfere with and possibly damage sensitive electronic devices. Itís important to guard against this by placing a ďsnubberĒ across all sounder or relay terminals. See the Snubbers section for more information.

Static electricity is another source of high voltage that can damage electronic components, for example if you touch the metal part of your key while your body is charged with static electricity. Although unlikely, it has happened, so take appropriate precautions. Using a USB-to-serial adapter cable instead of connecting directly to the computerís serial port can limit the extent of possible damage.

Key only

Serial cable and USB adapter for connecting a key

The easiest way to connect a key is to take a serial cable with a female DB9 connector on one end and simply cut off the connector at the other end. You can buy a Belkin F2N209-06 serial extension cable for $5 or less from many online suppliers.

Youíll need to find which wires correspond to pins 4 and 6 on the connector, and connect those two wires to your key. Unfortunately, thereís no standard color code for serial cables. For the Belkin F2N209-06 cable the correct wires are orange and green, but if you have a different cable then youíll need to use an ohmmeter or continuity tester to determine the right wires.

Sounder driver

Sounder Driver

Note: RTS = pin 7, SG = pin 5
Maximum supply voltage: 60 volts

Parts List

RS Catalog #
TIP120 NPN Darlington transistor 276-2068
10 Kohm 1/4 watt resistor 271-1335
1N914/4148 diode 276-1122
1N4005 micro 1 amp diode 276-1104
9-pin D-sub female connector 276-1538
D-sub connector hood 276-1539

In order to drive an external sounder from the serial port, youíll need an interface circuit like the one shown above. The circuit can be built from parts available at Radio Shack for about $6. The components can even be made to fit inside a DB9 serial port connector, although you may prefer to build it in a project box.

Sounder Interface

Serial port connector with sounder interface circuit inside

Loop interface

The loop interface circuit allows the computer to function as part of a normal telegraph loop. In its simplest configuration, that telegraph loop would consist of a key, sounder, and power supply, but it could contain other instruments as well. A circuit diagram and explanation of its operation can be found in the MorseKOB Loop Interface document.

MorseKOB Turnkey Interface

The loop interface circuit is available as a turnkey product from Morgan's Elk Creek Enterprizes.  See for ordering information.

USB-to-serial adapters

Most likely youíll be using a USB adapter cable to provide the necessary serial port for your interface. Itís important to understand that MorseKOB uses the RS232 control lines of the serial interface, not the data lines. This means that an adapter that may perform very well in a more conventional application could be unsuitable for MorseKOB. To play it safe, use one of the following adapters that are known to work. And remember, you may have to install driver software that comes with your particular adapter.

C2G (Cables to Go) USB to DB9 Serial Adapter Cable (product #26886)
I like this adapter because itís compact and inexpensive--less than $20 at,, and other online suppliers (also in Canada at and However, some users have run into performance problems, and itís not compatible with the Mac.
Tripp Lite ďKeyspanĒ High-Speed USB to Serial Adapter (model USA-19HS)
This is the one to use if you have a Mac. It works with Windows as well.
Dynex USB/PDA Serial Adapter Cable (model DX-UBDB9)
I donít have personal experience with this adapter, but itís reported to perform well in situations where the C2G model fails.


When a key in a telegraph loop is opened, the collapsing magnetic field in the inductors in the circuit (sounder and relay coils) caused by the sudden cessation of current flow creates a large transient voltage across the key contacts. A snubber, also known as a spark suppressor or spark killer, is a device used to damp this transient spike. In traditional telegraph circuits, the snubber was used to prevent pitting of the key contacts. With MorseKOB, however, the more important reason for using a snubber is to prevent interference or possible damage to sensitive components in the computer or USB-to-serial adapter.

A snubber in place across the sounder terminals

The best place to put the snubber is directly across the terminals of every sounder or relay in the circuit, as this minimizes the amount of radiated electromagnetic interference. If thatís not practical, then snubbers should be placed across all keys in the circuit. (Note: a snubber is not required for the ďkey onlyĒ interface. Itís only an issue when a sounder or relay is in the circuit.)

The following snubber designs have all been used successfully:

RC network
The traditional Western Union snubber consisted of a 22 Ω resistor in series with a 0.1 μFd capacitor. Itís important that the capacitor be nonpolarized (not electrolytic), and its voltage rating should be at least 600 volts.  You can make your own, or buy an off-the-shelf snubber such as the Cornell Dubilier model 104M06QC22 arc suppressor.
A simple diode, such as a 1N4005, makes a very effective snubber. The polarity of the diode needs to be in the reverse direction of the normal current flow. This approach has the possible disadvantage of making the sounder slow to release, resulting in an undesirable sluggish sound.
Back-to-back Zeners
A pair of Zener diodes, connected in series with each other and with opposite polarities (e.g., cathode to cathode), works well as a snubber. Unlike the simple diode approach, you donít have to worry about the direction of the current in the circuit, and itís less likely to result in sluggish response. Being more compact than an RC network, itís easier to conceal this type of snubber under the base of a sounder. The voltage rating of the Zeners needs to be greater than the normal voltage drop across the sounder.
A bidirectional transient-voltage-suppression (TVS) diode, also known as a transorb, is a device similar in function to the back-to-back Zeners just described, but specifically engineered for high power operation and integrated into a single package. As in the case of Zeners, the voltage rating of the transorb needs to be greater than the normal voltage drop across the sounder.
Neon bulb
I havenít used this approach myself, but a standard NE-2 bulb is reported to be an effective snubber. It has the unique appeal of flashing in sync with the circuit transitions, so you always know if itís working. The lifetime of the bulb is a possible issue in this application.

Serial port pins

The following table identifies the RS232 lines used by the program to interface with an external key or sounder.

Function RS232
Manual key or
paddle common
DTR 4 Orange
Manual key or
dot paddle
DSR 6 Green
Dash paddle CTS 8 Violet
RTS 7 Blue
SG 5 Yellow

*The color code shown is for the Belkin model F2N209-06 serial extension cable. Some other cables follow the same color code, some do not.